What Custom Can Manufacturers Won’t Tell You on Costs
Partager
Table des matières

What Custom Can Manufacturers Won’t Tell You on Costs

The cost items to clarify are material grade and gauge, tooling and printing setup, interior coatings, application-specific tests, and shipment packing. Whether these are included in the unit price depends on the written quotation; lock the specifications and change-order terms before approving production.

A tidy unit price may not show whether tooling, revêtements, essai, and packing are included. You approved samples and set a budget; now check that the quoted scope matches the final order.

Demander FANXUN’s engineers and managers where tooling, revêtement, and testing costs land in a quote.

Read on and learn to spot every cost layer before it quietly raids your wallet, because surprises belong at birthdays.

Points clés: What to Check in a Custom Can Quote

→ Choix du matériau: Metal grade, jauge, and coating specifications affect material costs; compare like-for-like quotations.

→ Tooling and Setup: Dies, printing plates, and press changeovers are charged upfront or amortized, so small runs cost more.

→ Testing Fees: Hydrostatique, adhésion, and leak tests plus compliance audits may appear as separate line items.

→ Hidden Extras: Tight wall tolerance, DOT-2P compliance, and VCI packaging quietly raise prices.

→ Lock Specs Early: Fix pressure, composants, and FEA dimensions before sampling, and add a specification-locked pricing clause.

Which Cost Layers Sit Inside a Custom Can Quote?

Got a quote that gave you sticker shock? Custom can manufacturers pack several cost layers into one number. Here’s what’s actually baked in, from the raw steel to the lab tests that prove your can won’t leak.

Matières premières: Electrolytic Tinplate Coils vs. Tin-Free Steel Sheets

De toute façon, comparer metal coils or sheets at the same grade, jauge, poids du revêtement, and order quantity before drawing a price conclusion.

What Tooling and Metal Sheet Lithography Press Setup Really Add

Small runs get hit hardest here. Outillage personnalisé means the dies that shape your can. Along with décoration en métal, it’s mostly a one-time cost:

  • Plate making, with one of the printing plates for each color
  • Lithography press changeovers and inscription checks so the colors line up

Sur 5,000 canettes, ceux setup fees sting per unit. Sur 500,000, they barely show up.

Interior Coating Costs: BPA-Non-Intent Interior Lacquer and Food-Grade Epoxy Phenolic Coating

Ton revêtement intérieur est le barrière de protection between the metal and the product. Compare the specified formulation, film weight, processus de durcissement, and required testing:

  1. BPA-non-intention laque
    • Confirm the exact formulation and destination-market requirements
    • Compare actual quotes rather than assuming a fixed premium
  2. Epoxy phénolique
    • Suitability as a doublure de qualité alimentaire depends on the formulation, nourriture, and processing conditions
    • Spécifier film polymère weight and curing requirements; obtain application-specific compliance evidence

For EU food-contact orders, vérifier BPA restrictions and the applicable transition provisions rather than treating a BPA-non-intent label as a complete compliance statement. Ask FANXUN to confirm the proposed lining and required supporting documents for the selected can and intended contents.

Which Testing and Compliance Fees Appear as Line Items?

Ask packaging suppliers to show these line items:

→ Defined pressure-resistance tests and separate leak checks for intégrité du joint

→ A migration test, which checks whether coating chemicals move into the food

→ Contrôles d'adhérence des revêtements et assurance qualité enregistrements; ISO 9001 concerns the quality management system, so request product-specific test reports separately

→ Applicable certification de sécurité audits or regulatory documentation, with the can type, destination, and scope identified

Solid custom can manufacturers list each tests de conformité fee on its own line. If you see a vague “misc” charge, ask what it covers. Good custom can manufacturers will explain it.

5 Cost Items to Clarify With Custom Can Manufacturers

Quotes look clean until the invoice lands. Custom can manufacturers often tuck extra costs into unit prices, so here’s a plain-English look at where your money quietly goes.

Tooling Amortization on Your Precision Body Maker

Coutume metal forming dies, lorsque requis, involve capital expenditure that may be charged upfront or spread across the agreed order quantity.

  • Amortissement des outillages les bases
    • Confirm whether the cost is included in your unit price
    • For a short run or early cancellation, agree any remaining payment in writing
  • Sneaky extras

Why Can Wall Thickness Tolerance Quietly Raises Your Price

Serré tolerance limits sur épaisseur de paroi sound smart. They’re also pricey.

Tighter specs can require more micrometer measurement checks on the metal gauge and may affect line speed, ferraille, et material consumption. Ask which tolerances are needed for the selected can design.

→ Good ingénierie de précision protège intégrité structurelle

→ Over-specifying just burns cash

Ask your custom tin can supplier what your product really needs.

Extra Charges for DOT-2P Pressure Vessel Compliance

DOT-2P compliance est one U.S. specification route pour un récipient aérosol, not a universal requirement for every aerosol can. The applicable container route depends on pressure, contenu, capacité, and the conditions of the transport rule.

  1. Matériels
    • Specify material and wall thickness for the selected container design
  2. Proof

Leak Detection Testing System Fees Buried in Quality Costs

Détection des fuites may be included in assurance qualité overhead or quoted separately; confirm the test method and whether the quote covers empty cans or filled packs.

  • Common methods
    • Décroissance de la pression chèques
    • Helium test for tiny leaks
    • Hot water bath testing for filled aerosol packs, là où c'est nécessaire; permitted alternatives have specific conditions
  • Where the cost hides
    • Ralentissez defect inspection
    • Cans rejected for poor intégrité du joint
    • Gear upkeep for each testing protocol

Packaging Add-Ons: Anti-Corrosion VCI Film Cover and Palletized Layer Pad Packaging

If specified, un VCI film cover est destiné à anticorrosion et prévention de la rouille pendant le stockage; confirm material compatibility and packing conditions. UN palletized layer pad ajoute protection du transit et sécurité du fret. Evaluate the benefit and the added matériel d'emballage and labor costs for your shipment.

Ask FANXUN to identify the included packing and any optional add-ons in the written quote.

Price Creep After Sampling? Fix Custom Can Specifications Early.

Quotes rarely jump for no reason. Most price creep traces back to specs that stayed loose until samples landed. Custom can manufacturers price what you lock, so nail the details before anyone cuts metal.

Lock Burst Pressure Resistance and Internal Deformation Pressure Before Sampling

  • Numbers to agree on
    • Pression d'éclatement: the point where the can actually fails. Write the seuil de sécurité vers le bas.
    • Internal deformation: the pressure where the dome or bottom bulges for good.
  • Why it hits your wallet
    • Plus haut résistance à la pression usually means thicker metal, and bespoke can suppliers price by gauge.
    • Changing targets after approval triggers new engineering validation and a fresh quote.

Put both figures and the agreed test methods in one technical specification. This reduces avoidable repeat intégrité structurelle chèques; it does not replace required production testing.

Aerosol Top, Bas, and Valve Mounting Cup: Confirm Every Component

Three parts, one conversation. Le top cone, extrémité inférieure, et valve mounting cup must match the can design and their respective sealing interfaces. A change can require renewed compatibility checks.

Before sign-off, vérifier:

  • Dome curve and height on the design blueprint
  • Bottom profile against your filling line
  • Cup fit at the sealing interface

Confirmer container geometry with FANXUN before tooling starts. A late swap on an aerosol component may require new dies, extra trials, and a revised quote.

Align Aerosol Capacity, Aperture, and Crimp Specifications With the Applicable Standards

  1. Size it right
    • Choisissez un volume de capacité, diamètre, and height supported by the applicable can standard and approved drawing.
    • UN one-inch (25.4 mm) aperture is not the finished diamètre de sertissage; agree the can opening, coupelle de valve, and crimp settings separately with the component supplier and filler.
  2. Stay standard
    • Serré tolérance dimensionnelle keeps fillers running without retooling.
    • Standardisation brings the cost per unit down.

Ask FANXUN to check design alignment contre l'accord aerosol dimensions tôt, and confirm which specification changes would require a revised quote.

1 Clause to Help Control Custom Can Cost Overruns

Nobody likes a surprise bill. Yet plenty of buyers get hit with one after signing off on a custom can design. A well-written clause can clarify the approved scope, change process, and allocation of costs from the quote to the final shipment.

A Specification-Locked Pricing Clause Backed by Hydrostatic Pressure Test and Salt Spray Corrosion Resistance Results

Voici l'affaire. Some custom can manufacturers quote low, then tack on extra fees once production gets rolling. A negotiated specification-locked pricing contract clause can help define which costs are included and how changes will be priced.

  1. Lock the specs to the price
    • List the metal thickness, revêtement, taille, and print details in the contract.
    • Attach the approved sample sheet as proof.
  2. Tie in the test results
    • Hydrostatic pressure test, le cas échéant: specify the pressure, durée, méthode, et critères d'acceptation. Distinguish proof testing from a destructive burst test and from routine leak testing.
    • Salt spray corrosion resistance: cans sit in a salty mist chamber for a set number of hours. This compares corrosion resistance under defined laboratory conditions; salt spray results alone do not predict service life or prove real-world durabilité du matériau.
    • Both reports become part of the deal, not just nice paperwork.
  3. Put every change in writing
    • Any spec tweak needs a signed change order that shows the new price.
    • Retests get a cost agreement before anyone runs them.
      • Failed because of the supplier: the supplier pays.
      • Upgrade requested by the buyer: the buyer pays.

Use this structure to clarify conformité de la qualité and manage cost overruns. Agree test scope, responsibility for retests, price-adjustment triggers, and remedies with FANXUN in writing; acceptance of any clause depends on the negotiated contract.

Références

  1. ASTM A624/A624M-22 — Tin Mill Products, Electrolytic Tin Plate, Single Reduced —ASTM International
  2. ASTM A657/A657M-18 — Electrolytic Chromium-Coated Tin Mill Products —ASTM International
  3. 21 CFR 175.300 — Revêtements résineux et polymères - NOUS. FDA / eCFR
  4. EU prohibition on the use and trade of Bisphenol A from 20 Janvier 2025 — European Commission — Access2Markets
  5. ASTM D3359-23 — Rating Adhesion by Tape Test —ASTM International
  6. ISO 9001:2026 — Systèmes de gestion de la qualité — Exigences -ISO
  7. 49 CFR 173.306 — Quantités limitées de gaz comprimés - NOUS. POINT / eCFR
  8. 49 CFR 178.33-8 — Tests - NOUS. POINT / eCFR
  9. SS-EN 14847:2005 — Dimensions of the 25,4 mm aperture — Swedish Institute for Standards (SIS)
  10. ASTM B117-26a — Operating Salt Spray (Brouillard) Appareil —ASTM International
Obtenir un devis gratuit