The cost items to clarify are material grade and gauge, tooling and printing setup, interior coatings, application-specific tests, and shipment packing. Whether these are included in the unit price depends on the written quotation; lock the specifications and change-order terms before approving production.
A tidy unit price may not show whether tooling, покрытия, тестирование, and packing are included. You approved samples and set a budget; now check that the quoted scope matches the final order.
Просить FANXUN’s engineers and managers where tooling, покрытие, and testing costs land in a quote.
Read on and learn to spot every cost layer before it quietly raids your wallet, because surprises belong at birthdays.
Ключевые моменты: What to Check in a Custom Can Quote
→ Выбор материала: Metal grade, измерять, and coating specifications affect material costs; compare like-for-like quotations.
→ Tooling and Setup: Dies, printing plates, and press changeovers are charged upfront or amortized, so small runs cost more.
→ Testing Fees: Гидростатический, адгезия, and leak tests plus compliance audits may appear as separate line items.
→ Hidden Extras: Tight wall tolerance, DOT-2P compliance, and VCI packaging quietly raise prices.
→ Lock Specs Early: Fix pressure, компоненты, and FEA dimensions before sampling, and add a specification-locked pricing clause.
Which Cost Layers Sit Inside a Custom Can Quote?
Got a quote that gave you sticker shock? Custom can manufacturers pack several cost layers into one number. Here’s what’s actually baked in, from the raw steel to the lab tests that prove your can won’t leak.
Сырье: Electrolytic Tinplate Coils vs. Tin-Free Steel Sheets
- Электролитическая жесть
- Сталь основной металл с electrolytic tin coating; corrosion performance depends on the contents and finish
- Specify tin-coating mass and обработка поверхности for the application
- Безоловянная сталь
- Steel substrate electrolytically coated with chromium and chromium oxide
- Food-contact suitability requires an appropriate coating system and evidence for the intended use
В любом случае, compare metal coils or sheets at the same grade, измерять, вес покрытия, and order quantity before drawing a price conclusion.
What Tooling and Metal Sheet Lithography Press Setup Really Add
Small runs get hit hardest here. Пользовательские инструменты means the dies that shape your can. Along with metal decoration, it’s mostly a one-time cost:
- Plate making, with one of the printing plates for each color
- Lithography press changeovers and регистрация checks so the colors line up
На 5,000 банки, те setup fees sting per unit. На 500,000, they barely show up.
Interior Coating Costs: BPA-Non-Intent Interior Lacquer and Food-Grade Epoxy Phenolic Coating
Твой внутреннее покрытие это защитный барьер between the metal and the product. Compare the specified formulation, film weight, процесс отверждения, and required testing:
- BPA-ненамерение лак
- Confirm the exact formulation and destination-market requirements
- Compare actual quotes rather than assuming a fixed premium
- Эпоксидная фенольная смола
- Suitability as a пищевая подкладка depends on the formulation, еда, and processing conditions
- Указать полимерная пленка weight and curing requirements; obtain application-specific compliance evidence
For EU food-contact orders, проверять BPA restrictions and the applicable transition provisions rather than treating a BPA-non-intent label as a complete compliance statement. Ask FANXUN to confirm the proposed lining and required supporting documents for the selected can and intended contents.
Which Testing and Compliance Fees Appear as Line Items?
Ask packaging suppliers to show these line items:
→ Defined pressure-resistance tests and separate leak checks for целостность уплотнения
→ A migration test, which checks whether coating chemicals move into the food
→ Проверка адгезии покрытия и гарантия качества записи; Iso 9001 concerns the quality management system, so request product-specific test reports separately
→ Applicable сертификация безопасности audits or regulatory documentation, with the can type, destination, and scope identified
Solid custom can manufacturers list each тестирование на соответствие fee on its own line. If you see a vague “misc” заряжать, ask what it covers. Good custom can manufacturers will explain it.
5 Cost Items to Clarify With Custom Can Manufacturers
Quotes look clean until the invoice lands. Custom can manufacturers often tuck extra costs into unit prices, so here’s a plain-English look at where your money quietly goes.
Tooling Amortization on Your Precision Body Maker
Обычай metal forming dies, когда это необходимо, involve capital expenditure that may be charged upfront or spread across the agreed order quantity.
- Амортизация оснастки основы
- Confirm whether the cost is included in your unit price
- For a short run or early cancellation, agree any remaining payment in writing
- Sneaky extras
- Equipment setup time on the производственная линия
- Machinery wear fees on long jobs
Why Can Wall Thickness Tolerance Quietly Raises Your Price
Тугой tolerance limits на толщина стены sound smart. They’re also pricey.
Tighter specs can require more micrometer measurement checks on the metal gauge and may affect line speed, металлолом, и material consumption. Ask which tolerances are needed for the selected can design.
→ Good точное машиностроение защищает структурная целостность
→ Over-specifying just burns cash
Ask your custom tin can supplier what your product really needs.
Extra Charges for DOT-2P Pressure Vessel Compliance
DOT-2P compliance является one U.S. specification route для аэрозольный контейнер, not a universal requirement for every aerosol can. The applicable container route depends on pressure, содержание, емкость, and the conditions of the transport rule.
- Материалы
- Specify material and wall thickness for the selected container design
- Proof
- Destructive pressure testing on samples as required by the selected specification
- For DOT 2P, one container from each daily lot of 25,000 or fewer must not burst below 240 psig; retain the applicable inspection and test records
Leak Detection Testing System Fees Buried in Quality Costs
Обнаружение утечек may be included in гарантия качества overhead or quoted separately; confirm the test method and whether the quote covers empty cans or filled packs.
- Common methods
- Падение давления чеки
- Helium test for tiny leaks
- Hot water bath testing for filled aerosol packs, где это необходимо; permitted alternatives have specific conditions
- Where the cost hides
- Помедленнее defect inspection
- Cans rejected for poor целостность уплотнения
- Gear upkeep for each testing protocol
Packaging Add-Ons: Anti-Corrosion VCI Film Cover and Palletized Layer Pad Packaging
If specified, а VCI film cover is intended for антикоррозийный и предотвращение ржавчины во время хранения; confirm material compatibility and packing conditions. А palletized layer pad добавляет защита транзита и охрана груза. Evaluate the benefit and the added упаковочный материал and labor costs for your shipment.
Ask FANXUN to identify the included packing and any optional add-ons in the written quote.
Price Creep After Sampling? Fix Custom Can Specifications Early.
Quotes rarely jump for no reason. Most price creep traces back to specs that stayed loose until samples landed. Custom can manufacturers price what you lock, so nail the details before anyone cuts metal.
Lock Burst Pressure Resistance and Internal Deformation Pressure Before Sampling
- Numbers to agree on
- Давление разрыва: the point where the can actually fails. Write the порог безопасности down.
- Internal deformation: the pressure where the dome or bottom bulges for good.
- Why it hits your wallet
- Выше сопротивление давлению usually means thicker metal, and bespoke can suppliers price by gauge.
- Changing targets after approval triggers new engineering validation and a fresh quote.
Put both figures and the agreed test methods in one техническая спецификация. This reduces avoidable repeat структурная целостность чеки; it does not replace required production testing.
Aerosol Top, Нижний, and Valve Mounting Cup: Confirm Every Component
Three parts, one conversation. А top cone, bottom end, и valve mounting cup must match the can design and their respective sealing interfaces. A change can require renewed compatibility checks.
Before sign-off, проверять:
- Dome curve and height on the план дизайна
- Bottom profile against your filling line
- Cup fit at the уплотнительный интерфейс
Подтверждать геометрия контейнера with FANXUN before tooling starts. A late swap on an aerosol component may require new dies, extra trials, and a revised quote.
Align Aerosol Capacity, Aperture, and Crimp Specifications With the Applicable Standards
- Size it right
- Выберите capacity volume, диаметр, and height supported by the applicable can standard and approved drawing.
- А one-inch (25.4 мм) апертура is not the finished диаметр обжима; agree the can opening, чашка клапана, and crimp settings separately with the component supplier and filler.
- Stay standard
- Тугой размерный допуск keeps fillers running without retooling.
- Standardization brings the cost per unit down.
Ask FANXUN to check design alignment против согласованного aerosol dimensions early, and confirm which specification changes would require a revised quote.
1 Clause to Help Control Custom Can Cost Overruns
Nobody likes a surprise bill. Yet plenty of buyers get hit with one after signing off on a custom can design. A well-written clause can clarify the approved scope, change process, and allocation of costs from the quote to the final shipment.
A Specification-Locked Pricing Clause Backed by Hydrostatic Pressure Test and Salt Spray Corrosion Resistance Results
Here’s the deal. Some custom can manufacturers quote low, then tack on extra fees once production gets rolling. A negotiated specification-locked pricing contract clause can help define which costs are included and how changes will be priced.
- Lock the specs to the price
- List the metal thickness, покрытие, размер, and print details in the contract.
- Attach the approved sample sheet as proof.
- Tie in the test results
- Hydrostatic pressure test, where applicable: specify the pressure, duration, метод, и критерии приемки. Distinguish proof testing from a destructive burst test and from routine leak testing.
- Salt spray corrosion resistance: cans sit in a salty mist chamber for a set number of hours. This compares corrosion resistance under defined laboratory conditions; salt spray results alone do not predict service life or prove real-world долговечность материала.
- Both reports become part of the deal, not just nice paperwork.
- Put every change in writing
- Any spec tweak needs a signed change order that shows the new price.
- Retests get a cost agreement before anyone runs them.
- Failed because of the supplier: the supplier pays.
- Upgrade requested by the buyer: the buyer pays.
Use this structure to clarify соответствие качества and manage cost overruns. Agree test scope, responsibility for retests, price-adjustment triggers, and remedies with FANXUN in writing; acceptance of any clause depends on the negotiated contract.
Ссылки
- ASTM A624/A624M-22 — Tin Mill Products, Electrolytic Tin Plate, Single Reduced — АСТМ Интернешнл
- ASTM A657/A657M-18 — Electrolytic Chromium-Coated Tin Mill Products — АСТМ Интернешнл
- 21 CFR 175.300 — Resinous and polymeric coatings — U.S. FDA / eCFR
- EU prohibition on the use and trade of Bisphenol A from 20 январь 2025 — European Commission — Access2Markets
- ASTM D3359-23 — Rating Adhesion by Tape Test — АСТМ Интернешнл
- Iso 9001:2026 — Системы менеджмента качества — Требования — ИСО
- 49 CFR 173.306 — Ограниченное количество сжатых газов — U.S. Точка / eCFR
- 49 CFR 178.33-8 — Tests — U.S. Точка / eCFR
- SS-EN 14847:2005 — Dimensions of the 25,4 мм диафрагма — Swedish Institute for Standards (SIS)
- ASTM B117-26a — Operating Salt Spray (Туман) Аппарат — АСТМ Интернешнл