What Custom Can Manufacturers Won’t Tell You on Costs
Share
Table of Contents

What Custom Can Manufacturers Won’t Tell You on Costs

The cost items to clarify are material grade and gauge, tooling and printing setup, interior coatings, application-specific tests, and shipment packing. Whether these are included in the unit price depends on the written quotation; lock the specifications and change-order terms before approving production.

A tidy unit price may not show whether tooling, coatings, testing, and packing are included. You approved samples and set a budget; now check that the quoted scope matches the final order.

Ask FANXUN’s engineers and managers where tooling, coating, and testing costs land in a quote.

Read on and learn to spot every cost layer before it quietly raids your wallet, because surprises belong at birthdays.

Key Points: What to Check in a Custom Can Quote

→ Material Choice: Metal grade, gauge, and coating specifications affect material costs; compare like-for-like quotations.

→ Tooling and Setup: Dies, printing plates, and press changeovers are charged upfront or amortized, so small runs cost more.

→ Testing Fees: Hydrostatic, adhesion, and leak tests plus compliance audits may appear as separate line items.

→ Hidden Extras: Tight wall tolerance, DOT-2P compliance, and VCI packaging quietly raise prices.

→ Lock Specs Early: Fix pressure, components, and FEA dimensions before sampling, and add a specification-locked pricing clause.

Which Cost Layers Sit Inside a Custom Can Quote?

Got a quote that gave you sticker shock? Custom can manufacturers pack several cost layers into one number. Here’s what’s actually baked in, from the raw steel to the lab tests that prove your can won’t leak.

Raw Materials: Electrolytic Tinplate Coils vs. Tin-Free Steel Sheets

Either way, compare metal coils or sheets at the same grade, gauge, coating weight, and order quantity before drawing a price conclusion.

What Tooling and Metal Sheet Lithography Press Setup Really Add

Small runs get hit hardest here. Custom tooling means the dies that shape your can. Along with metal decoration, it’s mostly a one-time cost:

  • Plate making, with one of the printing plates for each color
  • Lithography press changeovers and registration checks so the colors line up

On 5,000 cans, those setup fees sting per unit. On 500,000, they barely show up.

Interior Coating Costs: BPA-Non-Intent Interior Lacquer and Food-Grade Epoxy Phenolic Coating

Your interior coating is the protective barrier between the metal and the product. Compare the specified formulation, film weight, curing process, and required testing:

  1. BPA-non-intent lacquer
    • Confirm the exact formulation and destination-market requirements
    • Compare actual quotes rather than assuming a fixed premium
  2. Epoxy phenolic
    • Suitability as a food-grade lining depends on the formulation, food, and processing conditions
    • Specify polymer film weight and curing requirements; obtain application-specific compliance evidence

For EU food-contact orders, check BPA restrictions and the applicable transition provisions rather than treating a BPA-non-intent label as a complete compliance statement. Ask FANXUN to confirm the proposed lining and required supporting documents for the selected can and intended contents.

Which Testing and Compliance Fees Appear as Line Items?

Ask packaging suppliers to show these line items:

→ Defined pressure-resistance tests and separate leak checks for seal integrity

→ A migration test, which checks whether coating chemicals move into the food

→ Coating adhesion checks and quality assurance records; ISO 9001 concerns the quality management system, so request product-specific test reports separately

→ Applicable safety certification audits or regulatory documentation, with the can type, destination, and scope identified

Solid custom can manufacturers list each compliance testing fee on its own line. If you see a vague “misc” charge, ask what it covers. Good custom can manufacturers will explain it.

5 Cost Items to Clarify With Custom Can Manufacturers

Quotes look clean until the invoice lands. Custom can manufacturers often tuck extra costs into unit prices, so here’s a plain-English look at where your money quietly goes.

Tooling Amortization on Your Precision Body Maker

Custom metal forming dies, when required, involve capital expenditure that may be charged upfront or spread across the agreed order quantity.

  • Tooling amortization basics
    • Confirm whether the cost is included in your unit price
    • For a short run or early cancellation, agree any remaining payment in writing
  • Sneaky extras
    • Equipment setup time on the production line
    • Machinery wear fees on long jobs

Why Can Wall Thickness Tolerance Quietly Raises Your Price

Tight tolerance limits on wall thickness sound smart. They’re also pricey.

Tighter specs can require more micrometer measurement checks on the metal gauge and may affect line speed, scrap, and material consumption. Ask which tolerances are needed for the selected can design.

→ Good precision engineering protects structural integrity

→ Over-specifying just burns cash

Ask your custom tin can supplier what your product really needs.

Extra Charges for DOT-2P Pressure Vessel Compliance

DOT-2P compliance is one U.S. specification route for an aerosol container, not a universal requirement for every aerosol can. The applicable container route depends on pressure, contents, capacity, and the conditions of the transport rule.

  1. Materials
    • Specify material and wall thickness for the selected container design
  2. Proof

Leak Detection Testing System Fees Buried in Quality Costs

Leak detection may be included in quality assurance overhead or quoted separately; confirm the test method and whether the quote covers empty cans or filled packs.

  • Common methods
    • Pressure decay checks
    • Helium test for tiny leaks
    • Hot water bath testing for filled aerosol packs, where required; permitted alternatives have specific conditions
  • Where the cost hides
    • Slower defect inspection
    • Cans rejected for poor seal integrity
    • Gear upkeep for each testing protocol

Packaging Add-Ons: Anti-Corrosion VCI Film Cover and Palletized Layer Pad Packaging

If specified, a VCI film cover is intended for anti-corrosion and rust prevention during storage; confirm material compatibility and packing conditions. A palletized layer pad adds transit protection and cargo security. Evaluate the benefit and the added packaging material and labor costs for your shipment.

Ask FANXUN to identify the included packing and any optional add-ons in the written quote.

Price Creep After Sampling? Fix Custom Can Specifications Early.

Quotes rarely jump for no reason. Most price creep traces back to specs that stayed loose until samples landed. Custom can manufacturers price what you lock, so nail the details before anyone cuts metal.

Lock Burst Pressure Resistance and Internal Deformation Pressure Before Sampling

  • Numbers to agree on
    • Burst pressure: the point where the can actually fails. Write the safety threshold down.
    • Internal deformation: the pressure where the dome or bottom bulges for good.
  • Why it hits your wallet
    • Higher pressure resistance usually means thicker metal, and bespoke can suppliers price by gauge.
    • Changing targets after approval triggers new engineering validation and a fresh quote.

Put both figures and the agreed test methods in one technical specification. This reduces avoidable repeat structural integrity checks; it does not replace required production testing.

Aerosol Top, Bottom, and Valve Mounting Cup: Confirm Every Component

Three parts, one conversation. The top cone, bottom end, and valve mounting cup must match the can design and their respective sealing interfaces. A change can require renewed compatibility checks.

Before sign-off, check:

  • Dome curve and height on the design blueprint
  • Bottom profile against your filling line
  • Cup fit at the sealing interface

Confirm container geometry with FANXUN before tooling starts. A late swap on an aerosol component may require new dies, extra trials, and a revised quote.

Align Aerosol Capacity, Aperture, and Crimp Specifications With the Applicable Standards

  1. Size it right
    • Choose a capacity volume, diameter, and height supported by the applicable can standard and approved drawing.
    • A one-inch (25.4 mm) aperture is not the finished crimp diameter; agree the can opening, valve cup, and crimp settings separately with the component supplier and filler.
  2. Stay standard
    • Tight dimensional tolerance keeps fillers running without retooling.
    • Standardization brings the cost per unit down.

Ask FANXUN to check design alignment against the agreed aerosol dimensions early, and confirm which specification changes would require a revised quote.

1 Clause to Help Control Custom Can Cost Overruns

Nobody likes a surprise bill. Yet plenty of buyers get hit with one after signing off on a custom can design. A well-written clause can clarify the approved scope, change process, and allocation of costs from the quote to the final shipment.

A Specification-Locked Pricing Clause Backed by Hydrostatic Pressure Test and Salt Spray Corrosion Resistance Results

Here’s the deal. Some custom can manufacturers quote low, then tack on extra fees once production gets rolling. A negotiated specification-locked pricing contract clause can help define which costs are included and how changes will be priced.

  1. Lock the specs to the price
    • List the metal thickness, coating, size, and print details in the contract.
    • Attach the approved sample sheet as proof.
  2. Tie in the test results
    • Hydrostatic pressure test, where applicable: specify the pressure, duration, method, and acceptance criteria. Distinguish proof testing from a destructive burst test and from routine leak testing.
    • Salt spray corrosion resistance: cans sit in a salty mist chamber for a set number of hours. This compares corrosion resistance under defined laboratory conditions; salt spray results alone do not predict service life or prove real-world material durability.
    • Both reports become part of the deal, not just nice paperwork.
  3. Put every change in writing
    • Any spec tweak needs a signed change order that shows the new price.
    • Retests get a cost agreement before anyone runs them.
      • Failed because of the supplier: the supplier pays.
      • Upgrade requested by the buyer: the buyer pays.

Use this structure to clarify quality compliance and manage cost overruns. Agree test scope, responsibility for retests, price-adjustment triggers, and remedies with FANXUN in writing; acceptance of any clause depends on the negotiated contract.

References

  1. ASTM A624/A624M-22 — Tin Mill Products, Electrolytic Tin Plate, Single Reduced — ASTM International
  2. ASTM A657/A657M-18 — Electrolytic Chromium-Coated Tin Mill Products — ASTM International
  3. 21 CFR 175.300 — Resinous and polymeric coatings — U.S. FDA / eCFR
  4. EU prohibition on the use and trade of Bisphenol A from 20 January 2025 — European Commission — Access2Markets
  5. ASTM D3359-23 — Rating Adhesion by Tape Test — ASTM International
  6. ISO 9001:2026 — Quality management systems — Requirements — ISO
  7. 49 CFR 173.306 — Limited quantities of compressed gases — U.S. DOT / eCFR
  8. 49 CFR 178.33-8 — Tests — U.S. DOT / eCFR
  9. SS-EN 14847:2005 — Dimensions of the 25,4 mm aperture — Swedish Institute for Standards (SIS)
  10. ASTM B117-26a — Operating Salt Spray (Fog) Apparatus — ASTM International
Get A Free Quote