The cost items to clarify are material grade and gauge, tooling and printing setup, interior coatings, application-specific tests, and shipment packing. Whether these are included in the unit price depends on the written quotation; lock the specifications and change-order terms before approving production.
A tidy unit price may not show whether tooling, coatings, testen, and packing are included. You approved samples and set a budget; now check that the quoted scope matches the final order.
Vragen FANXUN’s engineers and managers where tooling, coating, and testing costs land in a quote.
Read on and learn to spot every cost layer before it quietly raids your wallet, because surprises belong at birthdays.
Kernpunten: What to Check in a Custom Can Quote
→ Materiaal keuze: Metal grade, graadmeter, and coating specifications affect material costs; compare like-for-like quotations.
→ Tooling and Setup: Sterft, printing plates, and press changeovers are charged upfront or amortized, so small runs cost more.
→ Testing Fees: Hydrostatisch, hechting, and leak tests plus compliance audits may appear as separate line items.
→ Hidden Extras: Tight wall tolerance, DOT-2P compliance, and VCI packaging quietly raise prices.
→ Lock Specs Early: Fix pressure, componenten, and FEA dimensions before sampling, and add a specification-locked pricing clause.
Which Cost Layers Sit Inside a Custom Can Quote?
Got a quote that gave you sticker shock? Custom can manufacturers pack several cost layers into one number. Here’s what’s actually baked in, from the raw steel to the lab tests that prove your can won’t leak.
Grondstoffen: Electrolytic Tinplate Coils vs. Tin-Free Steel Sheets
- Elektrolytisch blik
- Staal basismetaal met een electrolytic tin coating; corrosion performance depends on the contents and finish
- Specify tin-coating mass and oppervlakteafwerking voor de toepassing
- Tinvrij staal
- Steel substrate electrolytically coated with chromium and chromium oxide
- Food-contact suitability requires an appropriate coating system and evidence for the intended use
Hoe dan ook, vergelijken metal coils or sheets at the same grade, graadmeter, gewicht van de coating, and order quantity before drawing a price conclusion.
What Tooling and Metal Sheet Lithography Press Setup Really Add
Small runs get hit hardest here. Aangepaste gereedschappen means the dies that shape your can. Along with metalen decoratie, it’s mostly a one-time cost:
- Borden maken, with one of the printing plates for each color
- Lithography press changeovers and registratie checks so the colors line up
Op 5,000 blikjes, die setup fees sting per unit. Op 500,000, they barely show up.
Interior Coating Costs: BPA-Non-Intent Interior Lacquer and Food-Grade Epoxy Phenolic Coating
Jouw binnenbekleding is de beschermende barrière between the metal and the product. Compare the specified formulation, film weight, uithardingsproces, and required testing:
- BPA-niet-intentie lak
- Confirm the exact formulation and destination-market requirements
- Compare actual quotes rather than assuming a fixed premium
- Epoxyfenol
- Suitability as a voering van voedingskwaliteit depends on the formulation, voedsel, and processing conditions
- Specificeer polymeer film weight and curing requirements; obtain application-specific compliance evidence
For EU food-contact orders, rekening BPA restrictions and the applicable transition provisions rather than treating a BPA-non-intent label as a complete compliance statement. Ask FANXUN to confirm the proposed lining and required supporting documents for the selected can and intended contents.
Which Testing and Compliance Fees Appear as Line Items?
Ask packaging suppliers to show these line items:
→ Defined pressure-resistance tests and separate leak checks for integriteit van de afdichting
→ EEN migration test, which checks whether coating chemicals move into the food
→ Controles van de hechting van coatings En kwaliteitsborging records; ISO 9001 concerns the quality management system, so request product-specific test reports separately
→ Applicable veiligheidscertificering audits or regulatory documentation, with the can type, bestemming, and scope identified
Solid custom can manufacturers list each nalevingstesten fee on its own line. If you see a vague “misc” aanval, ask what it covers. Good custom can manufacturers will explain it.
5 Cost Items to Clarify With Custom Can Manufacturers
Quotes look clean until the invoice lands. Custom can manufacturers often tuck extra costs into unit prices, so here’s a plain-English look at where your money quietly goes.
Tooling Amortization on Your Precision Body Maker
Aangepast metal forming dies, wanneer nodig, involve capital expenditure that may be charged upfront or spread across the agreed order quantity.
- Afschrijving van gereedschap basis
- Confirm whether the cost is included in your unit price
- For a short run or early cancellation, agree any remaining payment in writing
- Sneaky extras
- Equipment setup time on the productielijn
- Machinery wear fees on long jobs
Why Can Wall Thickness Tolerance Quietly Raises Your Price
Nauw tolerantiegrenzen op wanddikte sound smart. They’re also pricey.
Tighter specs can require more micrometer meting checks on the metalen meter and may affect line speed, schroot, En material consumption. Ask which tolerances are needed for the selected can design.
→ Good precisietechniek beschermt structurele integriteit
→ Over-specifying just burns cash
Ask your custom tin can supplier what your product really needs.
Extra Charges for DOT-2P Pressure Vessel Compliance
DOT-2P compliance is one U.S. specification route voor een spuitbus, not a universal requirement for every aerosol can. The applicable container route depends on pressure, inhoud, capaciteit, and the conditions of the transport rule.
- Materialen
- Specify material and wall thickness for the selected container design
- Bewijs
- Destructive pressure testing on samples as required by the selected specification
- For DOT 2P, one container from each daily lot of 25,000 or fewer must not burst below 240 psig; retain the applicable inspection and test records
Leak Detection Testing System Fees Buried in Quality Costs
Lekdetectie may be included in kwaliteitsborging overhead or quoted separately; confirm the test method and whether the quote covers empty cans or filled packs.
- Common methods
- Drukverval cheques
- Helium test for tiny leaks
- Hot water bath testing for filled aerosol packs, waar vereist; toegestane alternatieven hebben specifieke voorwaarden
- Where the cost hides
- Langzamer inspectie van gebreken
- Cans rejected for poor integriteit van de afdichting
- Gear upkeep for each testing protocol
Packaging Add-Ons: Anti-Corrosion VCI Film Cover and Palletized Layer Pad Packaging
If specified, A VCI film cover is bedoeld voor anti-corrosie En roest preventie Tijdens opslag; confirm material compatibility and packing conditions. A palletized layer pad voegt toe doorvoerbescherming En beveiliging van de lading. Evaluate the benefit and the added verpakkingsmateriaal and labor costs for your shipment.
Ask FANXUN to identify the included packing and any optional add-ons in the written quote.
Price Creep After Sampling? Fix Custom Can Specifications Early.
Quotes rarely jump for no reason. Most price creep traces back to specs that stayed loose until samples landed. Custom can manufacturers price what you lock, so nail the details before anyone cuts metal.
Lock Burst Pressure Resistance and Internal Deformation Pressure Before Sampling
- Numbers to agree on
- Barst druk: the point where the can actually fails. Write the veiligheidsdrempel omlaag.
- Internal deformation: the pressure where the dome or bottom bulges for good.
- Why it hits your wallet
- Hoger drukweerstand usually means thicker metal, and bespoke can suppliers price by gauge.
- Changing targets after approval triggers new engineering validation and a fresh quote.
Put both figures and the agreed test methods in one technische specificatie. This reduces avoidable repeat structurele integriteit cheques; it does not replace required production testing.
Aerosol Top, Onderkant, and Valve Mounting Cup: Confirm Every Component
Three parts, one conversation. De top cone, onderkant, En ventiel montage cup must match the can design and their respective sealing interfaces. A change can require renewed compatibility checks.
Before sign-off, rekening:
- Dome curve and height on the ontwerp blauwdruk
- Bottom profile against your filling line
- Cup fit at the afdichtingsinterface
Bevestigen containergeometrie with FANXUN before tooling starts. A late swap on an aerosol component may require new dies, extra trials, and a revised quote.
Align Aerosol Capacity, Aperture, and Crimp Specifications With the Applicable Standards
- Size it right
- Kies een capaciteit volume, diameter, and height supported by the applicable can standard and approved drawing.
- A one-inch (25.4 mm) opening is not the finished krimpdiameter; agree the can opening, ventiel kopje, and crimp settings separately with the component supplier and filler.
- Stay standard
- Nauw dimensionale tolerantie keeps fillers running without retooling.
- Standaardisatie brings the cost per unit down.
Ask FANXUN to check design alignment tegen het afgesproken aerosol dimensions vroeg, and confirm which specification changes would require a revised quote.
1 Clause to Help Control Custom Can Cost Overruns
Nobody likes a surprise bill. Yet plenty of buyers get hit with one after signing off on a custom can design. A well-written clause can clarify the approved scope, change process, and allocation of costs from the quote to the final shipment.
A Specification-Locked Pricing Clause Backed by Hydrostatic Pressure Test and Salt Spray Corrosion Resistance Results
Dit is de deal. Some custom can manufacturers quote low, then tack on extra fees once production gets rolling. A negotiated specification-locked pricing contract clause can help define which costs are included and how changes will be priced.
- Lock the specs to the price
- List the metal thickness, coating, maat, and print details in the contract.
- Attach the approved sample sheet as proof.
- Tie in the test results
- Hydrostatic pressure test, waar van toepassing: specify the pressure, duur, methode, en acceptatiecriteria. Distinguish proof testing from a destructive burst test and from routine leak testing.
- Salt spray corrosion resistance: cans sit in a salty mist chamber for a set number of hours. This compares corrosion resistance under defined laboratory conditions; salt spray results alone do not predict service life or prove real-world materiaal duurzaamheid.
- Both reports become part of the deal, not just nice paperwork.
- Put every change in writing
- Any spec tweak needs a signed change order that shows the new price.
- Retests get a cost agreement before anyone runs them.
- Failed because of the supplier: the supplier pays.
- Upgrade requested by the buyer: the buyer pays.
Use this structure to clarify kwaliteit naleving and manage cost overruns. Agree test scope, responsibility for retests, price-adjustment triggers, and remedies with FANXUN in writing; acceptance of any clause depends on the negotiated contract.
Referenties
- ASTM A624/A624M-22 — Tin Mill Products, Electrolytic Tin Plate, Single Reduced — ASTM Internationaal
- ASTM A657/A657M-18 — Electrolytic Chromium-Coated Tin Mill Products — ASTM Internationaal
- 21 CFR 175.300 — Resinous and polymeric coatings - ONS. FDA / eCFR
- EU-verbod op het gebruik en de handel in Bisfenol A uit 20 Januari 2025 — European Commission — Access2Markets
- ASTM D3359-23 — Rating Adhesion by Tape Test — ASTM Internationaal
- ISO 9001:2026 — Kwaliteitsmanagementsystemen — Vereisten —ISO
- 49 CFR 173.306 — Beperkte hoeveelheden gecomprimeerde gassen - ONS. PUNT / eCFR
- 49 CFR 178.33-8 — Tests - ONS. PUNT / eCFR
- SS-EN 14847:2005 — Afmetingen van de 25,4 mm-opening — Swedish Institute for Standards (SIS)
- ASTM B117-26a — Operating Salt Spray (Mist) Inrichting — ASTM Internationaal